Bend At Home (DIY) Milwaukee M18 Battery Holder, 2-slot, Steel, USA Made

DIY-BEND YOUR OWN M18 BATTERY HOLDER!

🟡We laser cut, deburr and sand - you easily bend at guidelines!
🟡Ships flat

Keep your cordless power tool batteries organized, secure, and instantly accessible with this premium 14-gauge steel low-profile battery holder.

Engineered for tough jobsite, garage, workshop, or work van use, this rugged mount protects valuable batteries from damage, keeps them off work surfaces and out of cluttered drawers.

Built from solid steel — far tougher than plastic alternatives. The low-profile design mounts flush to walls, under cabinets, shelves, desks, van panels, or tool carts.

🟡Holds batteries securely to handle vibration in trucks, trailers, or during transport.
🟡Fast drop-in/drop-out for quick swaps — ideal for mixed-tool crews or shops running both brands.

Key Features & Benefits
✅ Premium 14-gauge steel construction — resists bending, warping, or breaking under heavy daily use
✅ Ultra-low profile & compact — sits close to the wall for clean installs in tight spaces
✅ Pre-drilled mounting holes — easy install with screws, bolts, or rivets on wood, metal, drywall, Pegboard, or slatwall
✅ Versatile mounting options — walls, workbenches, van panels, tool carts, or under shelves

Compatibility Notes
✅️Optimized for Milwaukee M18 batteries.
❌️Mount only — batteries, tools, and mounting hardware not included.

➡️Raw Steel Note
Raw steel version is deburred and ready to prime/paint or hang bare — susceptible to rust with moisture exposure; recommend powder coat or clear coat for protection.

➡️Perfect For
Professional contractors, electricians, carpenters, mechanics, DIY enthusiasts, fleet vehicles, mobile workshops, and anyone tired of hunting for batteries or dealing with cluttered tool bags.

➡️Pro Tip
Pair with our matching tool holders for a complete organized setup!

➡️Installation & Care
Bolt or screw to surface (hardware not included). Wipe clean with damp cloth; avoid harsh chemicals on powder coat.

➡️Order now and keep your batteries ready when you are — organized, protected, and always within reach. Your workflow deserves it. 🛠️

Thanks for supporting a small USA maker

Listing Note: BOCO Custom LLC is in no way affiliated with the specific tool brands pictured in the listing. Unless otherwise noted screws, tools, and batteries are NOT included.

10-Gauge Steel (0.1345" | Thickness of Two Stacked Dimes)

• Best For: Heavy-duty commercial wall mounts, shop workbenches, and massive modular tool stacks.
• The Advantage: Extreme structural stiffness. This ultra-thick steel completely eliminates flexing, twisting, and tool rattling, making it the definitive choice for demanding daily job-site use.

12-Gauge Steel (0.1046" | Thickness of a Standard House Key)

• Best For: Mobile service vans, enclosed trailers, and standard shop organization layouts.
• The Advantage: The ultimate sweet spot between bulletproof strength and smart weight distribution. It handles constant over-the-road vibrations flawlessly without adding unnecessary bulk to your mobile rig.

14-Gauge Steel (0.0747" | Thickness of a Nickel)

• Best For: Handheld battery organizers, small tool holsters, and lightweight shelf accessories.
• The Advantage: High-tensile rigidity in a streamlined profile. It provides a rock-solid, permanent mount for smaller gear while keeping your workspace layout clean and low-profile.

8-Gauge Aluminum (0.1285" | Heavy-Duty Marine Grade)

• Best For: Open truck beds, roof racks, exterior trailer sides, and high-moisture environments.
• The Advantage: Maximum corrosion resistance with severe weight savings. Shaved pounds keep your mobile fuel efficiency optimized while remaining completely immune to rain, snow, and road salt oxidation.

10-Gauge Stainless Steel (0.1345" | Thickness of Two Stacked Dimes)

• Best For: Premium exposed truck bed brackets, marine applications, high-end shop builds, and ultimate weather protection.
• The Advantage: Combines the absolute, unyielding structural rigidity of our thickest 10-gauge plate with total lifetime corrosion resistance. It requires no paint or powder coat to stay 100% immune to rust, road salt, and harsh outdoor elements.

Note: Sheet metal gauge numbers run inversely—the lower the gauge number, the thicker and more rigid the actual metal substrate is.

We fabricate our mounting solutions and accessories using commercial-grade materials built for harsh environments. Choose the right finish for your build and review our care recommendations below:

Textured Black Powder Coat

• What it is: An industrial-grade, chip-resistant finish applied over media-blasted metal. Ready to install out of the box and engineered to survive heavy daily tool friction.
• Care: Low maintenance. Wipe down occasionally with a damp microfiber cloth to remove dust or workspace grime. Avoid using harsh chemical solvents or abrasive pads that could scratch the protective coating.

Raw Steel

• What it is: Shipped as premium raw American steel that has been completely precision laser-cut, sanded, and deburred. Perfect for fabrication shops or DIYers who want to weld the brackets directly to a rig or custom paint them.
• Care: ⚠️ MUST BE COATED UPON ARRIVAL. Raw steel will oxidize and develop surface rust if exposed to moisture or air humidity. Wipe with a prep solvent or isopropyl alcohol to remove any fingerprint oils, then apply a high-quality metal primer and topcoat (or send it to your local powder coater).

Raw Aluminum

• What it is: Clean, lightweight, and completely rust-proof. Engineered specifically for high-moisture setups, open truck beds, or exterior trailer sides.
• Care: Naturally corrosion-resistant. Aluminum will develop a dull patina over time when exposed to the elements, which is completely normal and acts as a natural protective layer. To maintain a bright look, clean occasionally with a mild soap and water solution or a dedicated aluminum polish.

Hand-Painted Finishes (Custom Accents)

• What it is: Custom badges, logos, and accent configurations individually detailed and finished by hand right here in Apple Valley.
• Care: Handle with care during installation to prevent surface marring. Clean only with mild dish soap and water. Do not use brake cleaner, acetone, or heavy degreasers on hand-painted surfaces, as these chemicals will strip or dissolve the finish.