Skip to content
SKU MD14R-10PK

Milwaukee Packout Full-Width Mounting Plate – 10-Pack, Steel or Aluminum

Original price $700.00 - Original price $1,100.00
Original price
$700.00
$700.00 - $1,100.00
Current price $700.00
Finish Raw/Uncoated
Material Steel

Manufactured with Pride in the USA

FREE SHIPPING to the lower 48 states on every 10-pack.

A 10-pack of full-width mounting plates for Milwaukee® PACKOUT™ toolboxes, in 14-gauge steel or 1/8-inch aluminum. It is made for outfitting a service van, trailer, fleet or workshop wall. Each plate is laser-cut in Apple Valley, California and only about 0.5 inches tall. The 10-pack costs ten times the single-plate price, and the perk is that it ships free.

Quantity 10 plates
Shipping Free to the lower 48 states. In stock: 1–2 business days. Made to order: 1–2 weeks.
Fits Milwaukee PACKOUT full-width boxes and organizers. Comparable to Milwaukee 48-22-8485.
Material 14-gauge mild steel (about 0.075") or 1/8" (0.125") aluminum
Size 18.875" × 16.875" × 0.5" per plate
Wall load 75 lb per plate
Floor load 150 lb per plate
Finish Uncoated (weld ready, paint ready), or textured black or red powder coat (powder coat made to order)
Mounting Pre-drilled holes at 16" on center to match standard wall studs
Hardware Not included. Boxes and accessories are not included.
Origin Made in USA (Apple Valley, CA)

Load ratings assume appropriate hardware installed into a suitable structure. Aluminum plates carry the same rating as the 14-gauge steel plates.

Where it mounts: service vans, trailers, shop walls and shelving.

Need a different hole pattern or size? We make custom mounts. Contact us with your requirements.

Why steel or aluminum instead of plastic

  • Free shipping: every 10-pack ships free to the lower 48 states.
  • Space efficient: about 0.5 inches deep keeps stacks low in tight vans and shelving.
  • Rattle-free fit: laser-cut to the PACKOUT footprint for a click-in seat.
  • Fleet ready: consistent plates for outfitting a trailer or a whole fleet of vans.

Frequently Asked Questions

Why buy the 10-pack?
Every 10-pack ships free to the lower 48 states. The price per plate is the same as buying singles, so the savings are in shipping.

Do uncoated plates need paint?
Yes. Uncoated steel should be painted or clear-coated after installation to protect against oxidation.

What weight can each plate hold?
75 lb on a wall mount and 150 lb on a floor mount. Ratings assume appropriate hardware installed into a suitable structure.

Is mounting hardware included?
No. Mounting surfaces vary, so choosing the correct hardware for the installation is up to the end user or installer.

Do you make custom mounts?
Yes. If you need a different hole pattern or size, contact us with your requirements.

How long until it ships?
In-stock items ship within 1–2 business days. Made-to-order items ship in 1–2 weeks.

Shipping, returns and warranty: see our shipping policy, returns policy and warranty.

Made in the USA — BOCO Custom LLC. Milwaukee® and PACKOUT™ are trademarks of their respective owners. BOCO Custom LLC is not affiliated with or endorsed by them; brand names are used only to describe compatibility.

  • 10-gauge steel (0.135"): our thickest. Heavy loads, truck beds, workbenches.
  • 12-gauge steel (0.105"): mid-weight. Vans, trailers, everyday shop use.
  • 14-gauge steel (0.075"): light duty. Lighter gear and accessory mounts.
  • 1/8" aluminum (0.125"): light and rust resistant.
  • 11-gauge 304 stainless (0.125"): rust resistant without paint, made to order.

Lower gauge number = thicker metal. See the full thickness guide with a visual comparison

We fabricate our mounting solutions and accessories from mild steel, aluminum, and 304 stainless steel, built for harsh job-site environments. Choose the right finish for your build and review our care recommendations below.

Uncoated Steel (Paint Ready)

  • Overview: Shipped bare and untreated, straight from fabrication. Ideal for custom painting, powder coating, or welding into custom racks.
  • Appearance: May show light mill scale, surface scuffs, or minor flash rust on delivery, which is normal for uncoated steel.
  • Care & Maintenance: Uncoated steel will rust when exposed to moisture, humidity, or air. We strongly recommend cleaning and lightly sanding the surface, then applying paint, clear coat, or powder coat before installation.

Powder Coated

  • Overview: A durable, baked-on powder coat finish that protects the steel against wear, corrosion, and UV exposure. Powder coat is made to order.
  • Appearance: A smooth, uniform finish, textured black on most plates and red on select Packout plates, ready to install out of the box.
  • Care & Maintenance: Clean with warm water, mild dish soap, and a soft microfiber cloth. Avoid solvents such as acetone or paint thinner, and avoid abrasive scrubbers, which can wear the coating. Touch up deep gouges or scratches promptly to protect the metal underneath.

Uncoated Aluminum

  • Overview: A lightweight, naturally rust-resistant option, about one third the weight of steel. Ideal for open truck beds, work vans, and marine or wet environments.
  • Appearance: Bare metal with a clean industrial look. Aluminum forms a thin protective oxide layer on its own. Light surface grain or manufacturing tool marks may be present.
  • Care & Maintenance: Wash with automotive soap and water. Aluminum may dull or develop a light oxidation over time, which is normal. To restore the shine, use a standard aluminum polish.

Uncoated 304 Stainless Steel

  • Overview: Strong and highly rust resistant, for exposed truck beds, marine use, and wet or corrosive environments. Available on select plates, made to order.
  • Appearance: A clean, bare metal finish that needs no paint or coating.
  • Care & Maintenance: Low maintenance. Clean with soapy water or a stainless steel cleaner to remove grease, road grime, and fingerprints. Avoid steel wool and chlorine-based cleaners, which can mark or pit the surface.

What is Proposition 65?

Proposition 65 (officially the Safe Drinking Water and Toxic Enforcement Act of 1986) is a California law. It requires businesses to warn California consumers if a product can expose them to chemicals that the State of California lists as causing cancer, birth defects, or other reproductive harm.

These warnings are required even when a chemical is present in very small amounts that may not pose a significant health risk.

California Proposition 65 Warning

⚠️ WARNING: Cancer and Reproductive Harm. Products sold on this website can expose you to chemicals including lead, nickel, chromium (hexavalent compounds), titanium dioxide (airborne, unbound particles of respirable size), toluene, ethylbenzene, and formaldehyde, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

What our products are made from

Depending on the product, our items may include steel, aluminum, powder coat or paint (including spray paint), threadlocker, lithium grease, and plastics such as acrylic and acetal (Delrin). Metals and coatings can contain or release trace amounts of the chemicals above, especially during cutting, welding, sanding, or coating.

Why is this warning on my order?

BOCO Custom LLC ships products nationwide, so we include this warning to comply with California law. A Proposition 65 warning does not mean a product is unsafe or defective. It means a product may contain a trace amount of a listed chemical. We provide this information so you can make an informed purchase.


Notification Channels